Title: Clutch hub refresh? Who? Post by: CrewChief6 on April 06, 2010, 09:54:33 AM Who do you use to get your clutch hub refreshed? Mine is starting to slip. Is that worth a rebuild? Or is it a goner?
Title: Re: Clutch hub refresh? Who? Post by: sfreitas20 on April 06, 2010, 12:44:39 PM I did ours myself. Here is the process:
1. Press the bearing out of the hub. 2. Remove the inside seal carefully because behind it there are a bunch of little springs. (do all this in a very clean area so you can find the springs if/when they fly out) 3. Spray it all out good with brake cleaner. 4. Reinstall any springs that flew out 5. Pack the bearing good with a moly grease. 6. Press the bearing back into the hub. If that doesn't work for your bearings, you can get the bearings for about $120 to replace them in the hub. Title: Re: Clutch hub refresh? Who? Post by: CrewChief6 on April 06, 2010, 01:22:37 PM thanks Scott, but I'm just too busy to do it myself (or more like lazy...) :P
|