July 25, 2014, 07:18:32 AM
USAC Racing Forum

Username
Password
Don't have an account? Register now, it's free!

Reply Pages: [1]
Send this topic | Print
Author Topic: Pit Jack  (Read 1004 times)
schlossmtrsports
Rookie
*
Posts: 10


« on: May 23, 2010, 09:12:32 PM »

Making changes in the hot chute is now a snap with the Pit Jack. No more placing items under the car to lift the car off the ground. Light weight and compact. Constructed out of DOM Tubing with powder coat finish. Simply place Pit Jack on the rub rails and push down. The stand easily rolls under and securely lifts the car off the ground. Will not work on angled rear bumpers however you can lift the front or left and right sides together. I Didnt build the angled rear bumper stand because this would take a dedicated jack. 

See Ebay item 170488188306
65.00 plus 15.00 flat rate shippingschlossmtrsports@aol.com
Logged
schlossmtrsports
Rookie
*
Posts: 10


« Reply #1 on: June 06, 2010, 10:53:23 PM »

sold out of the last batch. I just built 8 more you can check them out on E-bay item number 170495394110

Tommy Schloss
Logged
Reply Pages: [1]
Send this topic | Print
Jump to: