USAC Racing Forum
October 25, 2014, 09:07:57 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Search Login Register  
Pages: [1]
  Send this topic  |  Print  
Author Topic: Animal install. and exhaust  (Read 1187 times)
McCune Motorsports
Rookie
*
Posts: 33


« on: March 27, 2010, 05:43:30 PM »

Purchased Animal motor and have a clearance problem.  The muffler hits on the rear bar on the frame.  I  can't slide motor forward to engine mount.  Can the exhaust be bent up to clear rear bar.  Rule book doesn't say if it is legal.  HELP PLEASE

Thanks in advance
Scott McCune
Logged

Scott McCune
McCune Motorsports
------------------------------------------------
Loose Moose Motorsports
Northside Marine
FTL Global Carriers
slowpoke
Rookie
*
Posts: 48


« Reply #1 on: March 27, 2010, 09:09:17 PM »

Yes you can bend it to clear if needed , the pipe can be shaped however needed but must retain maximum 18" length not counting muffler also must not have any steps or tapers.
« Last Edit: March 28, 2010, 02:06:58 PM by slowpoke » Logged
crew chief
Veteran
**
Posts: 84


« Reply #2 on: March 28, 2010, 12:15:26 AM »

Yes you can bend the pipe only thing the rules say is a max of 18 inches in length. we had to bend ours for clearance also
Logged
Pages: [1]
  Send this topic  |  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!