USAC Racing Forum
December 16, 2018, 12:10:34 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Search Login Register  
Pages: [1]
  Send this topic  |  Print  
Author Topic: how often  (Read 2932 times)
bracing
Rookie
*
Posts: 16


« on: July 28, 2009, 07:41:05 PM »


When do you know its time to lap your valves.
Logged
goffin20
National Champion
****
Posts: 319



WWW
« Reply #1 on: July 28, 2009, 09:26:28 PM »

Depends on who you ask, some say as often as you can, others say never.  I leave that up to my builder to decide.
Logged

clouse55
Feature Winner
***
Posts: 104


« Reply #2 on: July 28, 2009, 10:23:36 PM »

 Anytime I had to pull the head for tech I always took a good look at the sealing surface of the valves. Most of the time at assemble I would VERY LIGHTLY lap them. The more run time a valve has it "use hardens" and you end up grinding alot in the seat. Probably best to let your builder take care of it during a "freshin up'   
Logged
Swartz
Guest
« Reply #3 on: July 29, 2009, 10:15:18 AM »

Take the head off and turn it upside down on a table or something. Pour the thinest fluid you have available, lighter fluid, Kerosene, etc. in the combustion chamber. if any, or much, fluid leaks past the valves into the intake or exhaust port, well, you alredy have the head off. It's usualy best to replace the valve and start fresh.
Logged
Pages: [1]
  Send this topic  |  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!